 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
MODEL WA1
Wireless Alert System to Assist in Monitoring Wandering Patients
(1) Door sensor-transmitter and (1) Wireless receiver-sounder
The Model WA1 is a wireless wandering alert (transmitter) and (receiver) system that sends a signal over 200' away, that "latches" a pleasant volume controlled alerting sound to awake or alert the professional caregiver or home care relative without startling the patient, and continues to alert until reset.
The wandering alert system has several different sensors available to make any monitoring situation "simple", from monitoring a bed restricted person that requires assistance getting up from bed (Model WA1) (animation), or to monitoring doors and windows, (Model WA2).
The Model WA1 or WA2 also has a built-in assistance call function, with the use of our Model DA5T, (wireless push button) that provides a different audible alerting sound "momentary" for the patient that requires "non-emergency" assistance and is not wandering.
-
Micro technology provides maximum performance with the smallest minimum size available.
• Motion sensor (5" x 1" x 1")
• Receiver (2.5" x 3.5" x 1.5"). -
The Wandering Alert "family" of monitoring products is perfect for the following:
• Alzheimer patient monitoring
• Care homes
• Aging Parents at Home
• Foster Parenting Facilities
• Hospice Centers
• Child Care Centers
• Sleep Walking or Children Monitoring
• Medicine Cabinet Alert
• Gun Room and Cabinet
-
Patented low battery consumption design.
-
The (Model DA4TAC) is available with its own AC power supply to eliminate battery replacement for a more permanent monitoring installation.
-
Motion Sensor uses (1) 9v battery (included).
-
Remote receiver alert sounder uses 110v transformer (included).
-
Installs in seconds with our unique mounting hardware (included)
MODEL DA4T
(Wireless Motion Sensor for "Additional" Monitoring Areas)
(1) Motion sensor-transmitter
The Model DA4T is an "extra" motion sensor-transmitter that is simply added to the Model DA4D system, for monitoring additional doors, or areas of protection, without having to purchase another complete door chime system. The Model DA4T is simply attached to the second entry and can be programmed to alert with a different audible sound, if desired, to audibly distinguish where your attention is required.
-
Motion Sensor uses (1) 9v battery (included)
-
Installs in seconds with our unique mounting hardware (included)
Note: The Model DA4T is an "Optional Extra Motion Sensor Transmitter", for another entry. Therefore, it requires our Model WARD to function.
MODEL DA2T
(Wireless Magnetic Sensor for Doors or Windows)
(1) Sensor-transmitter for "extra" windows or doors
The WA2 is a battery operated elderly care wandering alert system, magnetically activated sensor, that transmits a wireless signal to a remote receiver over 200' away, that emits a latching alert sound, to assist the professional caregiver or home care relative, that the elderly care patient requires attention, without startling the patient, and continues to alert until reset.
The WA-2 door chime activates only when the door is opened and does not activate when the door is closed or left open. Ideal solution for doors, windows or medicine cabinets that are always kept closed.
Specially designed for versatility, the door sensor mounts easily on all types of doors and the Velcro adhesives (included) makes the installation a snap.
MODEL WARD
"Extra" Receiver-sounder for "additional" Alerting
(1) Wireless receiver-sounder
The Model WARD is an "extra" receiver-sounder that is simply added to the Model WA1 system, for alerting notification in additional areas, without having to purchase another complete system. The Model WARD is simply plugged into the second desired location, to audibly alert that your attention is required, with a pleasant, volume controlled "latched" alerting melody.
The Model WARD has a ON-OFF switch, conveniently located on the front of the unit to deactivate the receiver-sounder, until the monitoring function is required.
-
Volume control range of "0" to 85 db
-
Uses 110v transformer power supply (included)
-
Upstairs and Downstairs locations
MODEL WARD-RS
"Extra" Receiver-sounder with Wireless Reset
(1) Wireless receiver-sounder
The Model WARD-RS has all the same features found in the basic system with the addition of the wireless reset function. This function is ideal when more than one sounder, ie. upstairs and downstairs, is being used. Instead of going to each location to reset the sounder, simply press the wireless Model DA5T push button and each sounder is reset "wirelessly". Requires the addition of our Model DA5T (hand held wireless transmitter button).
(NOTE): The Model DALR cannot be used with the Model WARD-RS "reset receiver" as the 12 volt output feature is used to provide the reset function.
Note: The shopping cart uses 256 bit SSL encryption, so your orders are completely secure.
Mr. Chime, Inc. Information
Entry Door Chime Resources